Output: 300 to 500 tubes/min
Operators: 1 to 3
(depending on the degree of automation)
 zoom flashmovie
Description:
The "HTF 300" machine is designed for mass-market products that are produced in high volumes, but with the advanced size change system the 200 tube holders can be changed to the next size in only 2 minutes. For product change the machine has a max. down time of 10 minutes. The dosing pump is installed on a transport cart and can be very quickly and easily exchanged for a "new" one.
The tubes are fed by a fully automatic robot, which does not require any special pattern of the tubes in the empty tube cartons. Even if some tubes are missing in a box the system works without any problems.
With an additional transfer system the tube feeding and the tube filling can be separated on two floor levels. Our system allows an optimal product flow with a clear separation of "dry" and "wet" area. Food and pharmaceutical specifications can be easily fulfilled.
The whole machine is operating at 10-folds. Our philosophy is to have high output with maximum cycle time.
|
This allows gentle filling of fragile products and also products with solid pieces. Even the so-called "Dual Tube" with tube-in-tube technology can be perfectly filled at a speed of 250 pieces per minute!
Servo motor technology has become a standard for Weckerle machines, therefore, the machine can be adapted to new products by only changing parameters, and machine management is very simple for the operator.
Downstream, the filled and sealed tubes can be discharged to any continuous or intermittent running machine. Weckerle GmbH also provides tube-packaging lines.
complete product range
product information request
contact our specialists
|
